 |
|
Accessories for Optical Fiber Fusion Splicers
|
|
We offer an exclusive range of Accessories for Optical Fiber Fusion Splicers to our clients that protects the optic splicing point in various installation conditions such as wires, manholes, ducts, and direct buried. Our range is ideal for multi branching installation and complying with the requirements in each point of network. These products include:
|
| Accessories for Optical Fiber Fusion Splicers - ADC-13 Our organization offers a superior range of Accessories for Optical Fiber Fusion Splicers – ADC-13 to our clients at reasonable prices. These are sourced from certified vendors in the market and acknowledged for the high performance. Our range is available in various technical specifications and meets the individual requirement of various industries. Technical Specifications: | Power inlet type | AC, External DC and battery charging | | AC power supply | Input: 100V to 240V AC, 50Hz to 60Hz Power cord: Fujikura's AC power cords: ACC-13~17 | | DC power supply | Input: 10 to 15 V DC Power cord: Fujikura DCC-12 (Cigarette lighter plug) and Fujikura DCC-13 (Alligator clamps) | | Battery charging | Battery / Capacity: Fujikura BTR-08 / 4.0 Ah Charging voltage: 13.2 V Battery charge cord: Fujikura DCC-14 | | Power supply selection | Automatic | | High voltage protection circuit | Available (High input indicator equipped) | | Use for | FSM-60S, FSM-60R, FSM-18S, FSM-18R | | Usage | Power supply: Slotted into the above splicers Battery charging: Connecting to the battery as shown the photo below | | Dimensions | 120 x 117 x 38 mm | | Weight | 340 gm | |
| Accessories For Optical Fiber Fusion Splicers - BTR-08 We are engaged in providing a superior range of Accessories for Optical Fiber Fusion Splicers – BTR-08, which is exclusively used for Fujikura’s Arc Fusion Splicer, FSM-60S, FSM-60R, FSM-18S, FSM-18R. The batteries of our range are rechargeable and have long service life. Furthermore, we meet the bulk demand of our clients within a committed time frame. Technical Specifications: | Type | NiMH (Nickel Metal Hydride) | | Output voltage | 13.2 V | | Battery capacity | 4.0 Ah | | Battery charger | Exclusive Battery charger, ADC-13 / Battery charge cord, DCC-14 | | Expected battery cycle life | Max. 500 cycles | | Battery capacity indicator | Available | | Operating condition | -10 to +50 °C / Non-dew | | Dimensions | 120 x 117 x 38 mm | | Weight | 0.77 kg | | Use for | FSM-60S, FSM-60R, FSM-18S, FSM-18R | |
| Accessories for Optical Fiber Fusion Splicers - CT-30 We offer a wide range of Accessories for Optical Fiber Fusion Splicers – CT-30 to our clients, which is available in compact body and light weight. Our range is applicable up to 12-fiber cleaving. It has 48,000 fibers blade life (3 height x 16 positions) and is fiber scrap collection-free. We offer our range in both compact type and large capacity type of fiber scrap container. Technical Specifications: | Applicable fibers | Silica optical fiber | | Bare fiber diameter | 125 µm | | Cleaving angle | 0.5 degrees with single fiber | | Blade life | 48,000 fibers (1,000 fibers x 3 heights x 16 positions) | | Blade positions | 3 height and 16 rotating positions | | Dimensions | 102 x 82 x 46 mm with FC-02 and FDB-03 | | Weight | 210 gm with FC-02 and FDB-03 | |
| Accessories For Optical Fiber Fusion Splicers- ELCT2-20A Backed by our in-depth industry expertise, we are offering an extensive range of Accessories for Optical Fiber Fusion Splicers – ELCT2-20A to our clients. These are a pair of electrodes, which form the key item to generate arc discharge for fiber splicing. Apart from this, our range of ELCT series is the exclusive electrodes for Fujikura Arc Fusion Splicers. We also offer several types of the ELCT series, which is ideal for each model of Splicer. It is recommended to replace the electrodes with fresh pair in every 1,000 counts of arc discharge. We offer our range with a pair, for the anode and the cathode respectively. Specifications: | Use for | FSM-60S, FSM-60R, FSM-18S, FSM-18R, FSM-50S, FSM-50R, FSM-17S, FSM-17S-FH, FSM-17R | | Diameter | 2 mm | | Length | 20 mm | | Material | Tungsten alloy | | Performance guarantee | Up to 1,000 count of arc discharge | |
| Accessories for Optical Fiber Fusion Splicers - HJS-02 We also offer an extensive range of Accessories for Optical Fiber Fusion Splicers – HJS-02 to our clients. These HJS-02 machines are designed for stripping of fiber ribbon with up to 12 fibers all together. It is also equipped with a heater, which soften the coating of the fiber ribbon for smooth stripping. Furthermore, with the help of our team members, we meet the bulk demand of our clients within a committed time-frame. Specifications: | Applicable fiber count | 2 to 12 fibers | | Coating material | UV cured resin | | Thickness of the fiber ribbon | 250 to 400 µm | | Coating / Cladding diameter | 250 / 125 µm | | Stripping length | Max. 35 mm | | Approx. Heating time | 3 sec. at normal mode, 8 sec. at power saving mode | | Power supply | 12 vDC from Fujikura splicer with DC power cord 85 - 265 vAC with optional AC adapter | | Fiber setting | By FH-60 / 50 series Fiber Holder, except FH-60-900, FH-50-250 and FH-50-900 | | Dimensions | 107 x 40 x 29 mm | | Weight | 195 gm | |
|
